挡圈各种规格对照表：
DIN 6799轴用开口弹性挡圈Lock washers (retaining washers) for shafts
DIN 7993轴用钢丝挡圈及挡圈槽Round wire snap rings and snap ring grooves for shafts and
bores
DIN 472孔用挡圈—标准型和重型Circlips (retaining rings) for bores - Normal type and heavy.type
DIN 983轴用挡圈—带外凸耳型Retaining rings with lugs for use on shafts (external
circlips)
DIN 471轴用挡圈—标准型和重型Circlips (retaining rings)for shafts - Normal type and heavy.type
DIN 984孔用挡圈—带内凸耳型Spring retaining rings with lugs for use in bores (internal
circlips)
DIN 471 Circlips(retaining rings)for shafts
DIN 472 Circlips(retaining rings)for bores
DIN 983 Retaining rings with lugs
DIN 984 Spring retaining rings with lugs
DIN 6799 Lock washers
DIN 7993 Round wire snap rings and snap ring grooves. For shafts bores
JIS B 2805-1978 |代替1993确认开口挡圈-E形Retaining Rings-E Type
GB/T 893.1-86 | UDC 621.885 |代替GB893-76孔用弹性挡圈-A型Circlips for holes-type A
GB/T 893.2-86 | UDC 621.885孔用弹性挡圈-B型Circlips for hole-type B
GB/T 894.1-86 | UDC 621.885 |代替GB894-76轴用弹性挡圈-A型Circlips for shaft-type A
GB/T 894.2-86 | UDC 621.885轴用弹性挡圈-B型Circlips for shaft-type B
GB/T 895.1-86 | UDC 621.885 |代替GB895-76孔用钢丝挡圈Roundwire snap rings for hole
GB/T 895.2-86 | UDC 621.885 |代替GB895-76轴用钢丝挡圈Roundwire snap rings for shaft
GB/T 896-86 | UDC 621.885 |代替GB896-76开口挡圈“E”rings
